Simply, the most cost effective, effecient, reliable and safest
ground rod driver available.

Finally, a power ground rod driver that is safe, efficient, reliable and effective.

Give your guys the tool they need!

Driveze Corp.
30 Possum Circle
Norwalk, CT 06854
Tel: (800) 448-2912
Tel: (203) 853-7698
Fax: (203) 853-6317

www.drivezecorp.com

Ground Rod Driver
Below is product information from the drivezcorp website.

The PGD 97-0603-625 (for 5/8" rod) or the PGD 97-0603-750 (for 3/4" rod) weigh 28 lbs and are 27 in. including shank.

Uses a power source of your choice: Hydraulic, Air, Electric, or Gas Breakers. Just specify collet size of your breaker and the correct tapered shank will be delivered with the unit: 7/8" x 3 1/4", 7/8" x 4 1/4", 1" x 4 1/4", 1 1/8" x 6", or 1 1/4" x 6" shanks are available.

Safe: Operator stands on the ground regardless of rod length.
Portable: Weighs only 28 pounds, without the breaker.
Effective: The chuck supports the rod near ground level, minimizing vibration in the rod, which can be 6, 8, 12 or 16 feet long, assuring a comfortable and safe position for the operator. Couplings can be installed between sections of rod when the joint is between the driver and ground level.
Efficient: The same breaker is used for other work from the power source on the line vehicle. Driver can be used with breakers for 30 to 60 pounds.
Reliable: No moving parts to wear out. Made from high impact tool steel hardened to withstand the most difficult conditions.

For purchases call (800) 448-2912

or visit www.drivezecorp.com